Features

• The Universal Debugger / In-Circuit Emulator, can be used for different CPUs In-Circuit Emulations, including 6502, Z80, 8048, 8051, 8086, 8088, etc...
• Two 8-bit debugger ports can be connected to form a 16-bit Debugger / In-Circuit Emulator.
• It consists of an interface adaptor, control unit, a built-in EPROM programmer, and a 8032 Emuladaptor (for 8032 CPU In-circuit Emulation use).
• Two 8-bit debugger ports can be set in different RAM or ROM modes by software individually.
• The EPROM programmer can be used to program 24-pin through 32-pin EPROM (16K to 1M), e.g, 2716 to 27010, or 27C16 to 27C010.
• Can be connected directly to 40pin standard CPU socket, 50-pin APEX interface, 50-pin 8255 I/O PCI interface.
• Disassembler of different systems such as 6502, z80, 8048, 8051, 8085, 8086, 8088.
• User's Editor package can be assigned from this system.
• Attached CROSS-ASSEMBLER, without any external tools for converting .ASM to .HEX & .EXE.
• A large pool of I/O applications, including EDS-8802 ~ 8086, EDS-8809-1, give users flexibility in designing and expanding their learning objectives.

Hardware Specification

• Control system board
• Built-in EPROM Programmer Board
• 8032 CPU In-Circuit Emuladaptor
• D-Type 25-pin PC I/O adaptor.
• D-Type 25-pin round cable
• 34-pin IDC flatcable
• 5-pin to 4-pin control cable
• 50-pin IDC flatcable
• 40-pin IDC flatcable
• 34-pin to 32-pin IDC flatcable
• 50-pin Header to socket adaptor
• 40-pin Header to Socket adaptor
• EDS-5202 Experiment target board

Software & Reference

• Disassembler of 6502, Z80, 8748, 8751, 8085, 8086, 8088
• Built-in programmer driver
• Universal Program Debugger Driver
• 8032 In-Circuit Emulator Driver
• Forward Trace and proceeding record
• Back Trace and proceeding record
• Dos shell return
• Attached CROSS-ASSEMBLER (BGC51)
• Breakpoint Setting Control
• Single-step program Execution control
• Editor can be assigned under the system
• File selection of menu screen
• User's guide included.